Philips BDP5010/F7 Blu-ray Player User Manual


 
41
SETUPS
EN
Set the speaker configuration to match the size/number of
your speakers.
1) Use [K / L] to highlight speakers you want to set in
the illustration below.
•If you press [RED], each speaker outputs the test tone for
2 seconds in rotation.
You can move among the speakers as illustrated below:
2) Press [OK] repeatedly to change the setting.
* With regard to the low frequency sound which is less than 100 Hz, the
sound will be output from the Subwoofer.
For subwoofer, only on/off is available. (You cannot
change the size of the subwoofer.)
When the front speakers are set to “SMALL”, subwoofer
setting remains “ON” and cannot be changed.
When subwoofer is set to “OFF”, the front speaker setting
remains “LARGE” and cannot be changed.
Some BD-video or DVD-video feature a ratings lock level.
Playback will stop if the ratings exceed the levels you set, it
will require you to enter a password before the disc will
playback. This feature prevents your children from viewing
inappropriate material.
1) With “Ratings Lock” selected in the “Advanced
Setup” menu, press [OK].
2) If a PIN code has not been set, proceed to step 2-a).
If a PIN code has already been set, proceed to step
2-b).
If you want to change the PIN code, proceed to
step 2-c).
If you forget the PIN code, proceed to step 2-d).
Speaker Setup
HOME A
“Settings”
A
“Advanced
Setup”
A“Audio” A
“Analog
Audio”
A
“Speaker
Setup”
Speaker Setup
Speaker Distance
Speaker Level
Front (L)
Center
Subwoofer
Front (R)
Surround (L)
Surround (R)
: [U]
: [D]
Setting
Suitable for
Front (L/R)
Surround
(L/R)
Center
Subwoofer
L
A
R
G
E
Large
speakers with
the capacity
for powerful
low frequency
sound.
S
M
A
L
L
Small speakers
which do not
bare the
powerful low
frequency
sound.*
O
N
When
subwoofer
speaker is
connected.
O
F
F
No speakers.
Ratings Lock
HOME A
“Settings”
A “Advanced Setup” A “Ratings Lock”
Language
Video Output
Audio
Ratings Lock
Rating Level
New PIN
Others
Introduction Connections Basic Setup Playback OthersFunction Setup