Philips DVD724 DVD Player User Manual


 
Front Panel 17
Display
Current Disc information appears here, includ-
ing elapsed playing time, current Track number,
or active feature (NEXT when you move to
the next Chapter, RPT ALL when playing a
Disc repeatedly, etc.).
Disc Tray
Insert a Disc here. Load the
Disc with the label facing up.
Details are on page 15.
OPEN/CLOSE button
Press to open or close the Disc
tray.You also can open or close the
disc tray by pressing and holding
the Number 1 button on the
remote control for two seconds.
POWER ON/OFF button
Press to turn the DVD Player on or off.The button is depressed (or pressed down) when the power is on.
The button is released when the power is completely off.To turn on the DVD Player using the POWER 2
button on the remote control, the POWER ON/OFF button on the Player must be depressed.
PROGRESSIVE SCAN button
If you connected the DVD Player’s Y PB PR jacks to Progressive Scan Y
PB/CB PR/CR In jacks on a TV, press the PROGRESSIVE SCAN button to
use Progressive Scan video. Do this only if your TV has Progressive Scan.
PREV (ious)
44
button
Press to return to previous Chapters
or Tracks. Details are on page 19.
NEXT
¢¢
button
Press to select the next Chapter or Track.
Details are on page 19.
STOP
77
button
Press once to stop Disc playback. Play will resume
from the same point the next time you start play-
back. Or press STOP
77
twice to stop Disc play-
back. Play will resume from the beginning of the
Disc the next time you start playback.You must
stop playback by pressing STOP
77
twice in order
to access PREFERENCES in the DVD Player’s
Setup menu.
PLAY/PAUSE
3388
button
Press to start playing a Disc. Press once during
playback to pause play; press again to resume
play from the same point.
Remote Sensor
Point the DVD Player’s remote
control here when using the
remote to operate the Player.