Filter
Top Products
Hookups (cont’d) 13
DVD/VCR to a TV and to a Stereo Receiver that is Dolby Digital-compatible
Using Digital
Audio connections
DVD/VCR
AUDIO OUT
DVD/VCR
OUT
IN
COAXIAL
Y
Cb
Cr
S-VIDEO
OUT
COMPONENT
VIDEO OUT
VIDEO
ANT-IN
ANT-OUT
AUDIO
R
L
R
CH3CH4
L
DIGITAL AUDIO OUT
PCM /MULTICHANNEL
VIDEO IN
COAXIAL
DIGITAL
AUDIO IN
1
Connect the antenna or Cable TV signal to the ANT-IN (Antenna In)
jack of your DVD/VCR.
2
Connect a coaxial digital audio cable (not supplied) to the DVD/VCR’s
COAXIAL DIGITAL AUDIO OUT jack and to the COAXIAL DIGITAL
AUDIO IN jack on the Stereo Receiver.
This digital audio connection only provides sound for the DVD Player of the DVD/VCR. So, in
order to use the VCR features or view TV channels at the DVD/VCR, you still need to either
connect the RF coaxial cable between the ANT-OUT jack of the DVD/VCR and the TV’s
Antenna In jack, or connect the supplied red/white audio cables.To connect the supplied RF
coaxial cable, see step 2 on page eight.To connect the red/white audio cables, see step 2 on
page 11.
3
Connect the supplied yellow video cable to the yellow DVD/VCR
VIDEO OUT jack on the DVD/VCR and to the VIDEO IN jack on the
TV. To use component video cable or S-Video cable instead for the DVD Player,
see pages 11-12.You will still need the yellow video cable or RF coaxial cable for
VCR features.
4
Plug in the power cords of the stereo receiver,TV, and DVD/VCR.Turn
on the stereo receiver and select its Auxiliary IN channel.Turn on the
TV and set it to the correct Video In channel.
5
You are ready to turn on the DVD/VCR. Go to page 15 before turning on
the DVD/VCR.
Remember...
Some DVDs are recorded in 5.1 channel Dolby Digital Surround. Select 5.1 channel
Dolby Digital Surround Sound in the DVD Disc menu.
If you connect the DVD/VCR to a Dolby Digital Stereo Receiver, set DOLBY DIGITAL
to ON in the DVD Player’s Setup menu. Details are on page 70. If the DVD/VCR is not
connected to a Dolby Digital-compatible Stereo Receiver, set DOLBY DIGITAL to OFF.
Incorrect settings may cause noise distortion and damage the speakers.
2
3
Back of TV (example only)
Stereo Receiver
DVD/VCR
Antenna/Cable TV
Signal
1
H9231CD(EN).QX3 02.9.5 7:13 PM Page 13