Philips DVD757VR/02 DVD VCR Combo User Manual


 
15
English
Repeat
REPEAT are available only during playback.
Repeat Title / Chapter
To activate the repeat function,press REPEAT during playback.
The repeat mode changes as described below every time you
press the button.
Notes:
- Repeat Title/Chapter is not available with some scenes.
- The REPEAT setting will be cleared when moving to
other title or chapter.
Repeat Track
To activate the repeat function,press REPEAT during playback.
The repeat mode changes as described below every time you
press the button.
Notes:
- The REPEAT setting will be cleared when moving to
other track.
- Repeat playback does not function during repeat A-B
playback.
- Repeat playback is not available when you play the
Video CD with PBC function.
Repeat at A-B
1 Press REPEAT A-B at your chosen starting point.
A- appears briefly on the TV screen.
2
Press REPEAT A-B again at your chosen end point.
A-B appears briefly on the TV screen,and the repeat
sequence begins.
3 To exit the sequence, press REPEAT A-B.
Notes:
- The repeat A-B section can only be set within the cur-
rent title (for DVDs), or current track (for audio CDs).
- Repeat A-B is not available with some scenes in DVD.
- To cancel the A point which was set,press CLEAR.
- Repeat A-B playback does not function during title,
chapter,track or all repeat playback.
Zoom
The Zoom function allows you to enlarge the video image and to
pan through the enlarged image.
1 Press ZOOM during playback.
Playback will continue.
2 Press ZOOM repeatedly to select the required zoom factor:
x2,x4 or OFF.
3 Use Arrow ( L / K / B / s )to move the zoomed picture
across the screen.
4 To exit zoom mode, press ZOOM to OFF.
Notes:
- Zooming function does not work while disc menu is
shown.
- x4 zoom is not available on some discs.
- only x2 zoom is available on video CDs.
Playing a Disc
DVD-V
Track
There are three ways to begin playback on an Audio CD at a spe-
cific Track.
Using the Numerical key pads
1 Press numerical key pads to enter the desired Track number.
Playback will start at the selected track.
For single digit tracks (1-9),press a single number (eg.track 3,
press 3).
To play track 26,press +10,2, 6 on the numerical button.
Using the SEARCH MODE
1 Press SEARCH MODE.
The track search display appears.
2 Within 30 seconds,select a desired track number using
numerical key pads. For single digits press 0 first.
Playback will start at the selected track.
Using the SKIP HG
During playback,press
SKIP
G
to move to the next track. Press it
repeatedly to skip subsequent tracks. Press
SKIP
H
to go back to
the beginning of the current track. Press it repeatedly to go to the
previous tracks
.
Track number will appear briefly on the DVD display panel.
If SKIP is pressed while the playback is paused, the playback
will be paused again after skipping to the next track.
Note:
SKIP HGare not available when playback is
stopped.
CD
Title / Chapter Search
1 Press SEARCH MODE once for
the Chapter search,twice for the
Title search during playback.
2 Enter the desired chapter/title
number using numerical key pads.
/2
Time Search
1 During playback,press SEARCH MODE three times
(CD/VCD:twice) to display the Time Search on the TV screen.
2 Within 30 seconds,enter a desired disc time using numerical
key pads.
Playback will start at the specified time.
3 Press CLEAR to erase the incorrect input.
DVD-V
DVD-V
CHAPTER TITLEOFF
(current chapter repeat) (current title repeat)
(repeat off)
DVD-V
CD
CD
TRACK ALLOFF
(current track repeat) (entire disc repeat)
(repeat
off)
VCD
VCD
(without PBC function)
VCD
(without PBC function)
VCD
(without PBC function)
VCD
CD
TRACK ALLOFF
(current track
repeat)
(entire disc
repeat)
(repeat off)
GROUP
(entire group
repeat)
MP3