Filter
Top Products
23
Enter the setup menu
0 Enter the SETUP menu by pressing the SETUP key in STOP mode. When you quit
the setup menu, the settings will be stored in the player’s memory even when the
player is switched to power off.
The way of operations
Press the SETUP key in the STOP mode and the SETUP menu will be displayed on the
screen.
0 Press the SELECT key on the remote control to open the next level submenu or confirm
your selection.
0 Press the 1 2 keys on the remote control to enter the submenu or return to the previous
menu.
0 Press the 34 keys on the remote control to highlight the option in menus.
0 When setup is completed, press SETUP key to quit the setup menu.
Setup Menu
General setup menu
Some settings are needed in this menu. they are: DISC LOCK, PROGRAM,
TV DISPLAY, VIDEO OUTPUT, TV TYPE, OSD LANGUAGE and SCREEN SAVER.
Follow the steps below:
1. Press the SETUP key to enter the setup menu.
2. Press the 34 keys to choose the GENERAL SETUP menu.
3. Press the SELECT key to confirm selection.
Disc lock
When the disc is locked, the player will store its typical code into the memory
for the future identification. For the next playback, the DVD player will prompt to enter
the password.
1. Press the 34 keys to highlight the DISC LOCK item in the GENERAL SETUP
menu.
2. Press the SELECT key.
3. Enter its submenu by pressing the 2
key.
- LOCK: Lock the disc being played.
- UNLOCK: unlock the disc.
4. Press the 1 key to return to the GENERAL SETUP menu.
NOTE:
1. When playback a locked disc, the DVD player will prompt to enter your password or
3308 (default) password.
2. To change the password , refer to the option PASSWORD in the
PREFERENCE menu (see page 31).