Filter
Top Products
38 Editing: Disc Information Screen
You can change settings for a DVD+RW or unfinalized DVD+R from the
Disc Information Screen.
1
When in the Index Picture Screen, press STOP C to select
the first Title on the Disc.
2
Press 8CH+ to enter the Disc Information Screen.
3
In the Disc Information Screen, press : to enter the
Settings menu. You cannot do this if a DVD+R is finalized.
4
Press 8CH+ or 9CH- to select Disc name, Protection,
Erase disc (DVD+RW only), Make edits compatible
(DVD+RW only), or Finalize disc (DVD+R only). Proceed as
follows, depending on which feature you want to adjust.
●
D
isc name (DVD+RW and DVD+R)
Press :. Press ; or : to choose the character position,
then press 8CH+ or 9CH- to enter a character. Press
SELECT to alternate between capital and lower case characters.
Press CLEAR to erase a character (the space will remain). When
the name is complete, press OK.
●
Protection
(DVD+RW and DVD+R)
Press :. Press 8CH+ or 9CH- to select Protected or
Unprotected, then press OK. If you protect the Disc, y
ou cannot
edit or record it
.“Disc locked” will appear on the TV briefly if you
try to do so.To edit or record again, select Unprotected.
Remember, protecting a DVD+R is not the same as finalizing it.
Finalization cannot be undone.
●
Erase disc
(DVD+RW only)
Press OK.
“This will erase all titles Press OK to confirm” will
appear. Press OK again to begin erasing. (If you decide not to
erase the Disc, press ;.) “Erasing disc” appears until erasing is com-
plete.When the Disc is erased, the Index Picture Screen will reap-
pear, showing the free space on the Disc.
● Make edits compatible (DVD+RW only)
Press OK.“This will take XX” and “Press OK to confirm” will
appear to indicate how long the action will take. (If you decide to
not make edits compatible, press ;.)
Press OK again. “Working ..” and a progress % bar will appear.The
Index Picture Screen will reappear when the process is complete.
Make edits compatible appears only if you have added Chapter
markers or made Chapters invisible on the DVD+RW. See page 39.
● Finalize Disc (unfinalized DVD+R only)
Press OK. “Finalizing disc” will appear during the process.This may
take a few minutes.Then, the Index Picture Screen will reappear.
You cannot unfinalize a DVD+R.You cannot record or edit the
DVD+R after you finalize it. A DVD+R will play on other DVD
Players only after you finalize it.
5
If necessary, press ; when you are finished and want to return
to the Disc Information Screen.
• Index Picture Screen details are
on page 31.
• If a DVD+R was recorded on a
different DVD Recorder, the set-
tings may not be accessible.
• A disc name may contain a
maximum of 64 characters.
Helpful Hints
Settings for XXXXXX
s
L
01Disc name B sample
Protection Unprotected
Erase disc
Make edits compatible
DVD+RW example
STANDBY
REC/OTR
TIMER REC MODE PLAY MODE TV/DVD
MONITOR
•TV
DIM RETURN T/C
DISC MANAGER FSS SELECT
SUBTITLE
STOP TV VOLUME
PAUSESLOW
PLAY
AUDIO ANGLE ZOOM
GUIDE/TV
MUTECLEAR
`
CHCH
-
CHCH
+
OK
SYSTEM
DISCDISC
Ç
H Gk
MENU
2-5
1