Filter
Top Products
English
20
Getting Started (continued)
Step 3 : Selecting the
matching color system
The color system of the DVD player, disc
and TV should match in order for the
disc to play. Before changing the TV
system, determine the color system of
your TV.
VIDEO SETUP PAGE
TV TYPE
TV DISPLAY
PICTURE SETTING
ADV PICTURE
PAL
NTSC
MULTI
A Press SYSTEM MENU.
B Press X repeatedly to select { Video
Setup Page }.
C Press S T to select { TV Type }, then
press X.
D Use S T to select one of the options
below:
{ PAL }
Select this if the connected TV has the
PAL color system. It will change the
video signal of an NTSC disc and output
it to PAL format.
{ NTSC }
Select this if the connected TV has the
NTSC color system. It will change the
video signal of a PAL disc and output it to
NTSC format.
{ Multi }
Select this if the connected TV is
compatible with both NTSC and PAL
(multi-system). The output format will be
in accordance with the video signal of the
disc.
E Select a setting and press OK.
Follow the instructions show on the
TV to con rm the selection (if any).
CHANGING PALTO NTSC
1. ENSURETHATYOURTV SYSTEM SUPPORTS
NTSC STANDARD.
2. IFTHERE IS A DISTORTED PICTURE
DISPLAYED ONTHETV,WAIT 15 SECONDS
FOR AUTO RECOVER.
CANCELOK
F Press W to highlight { OK } and press
OK to con rm.
Tips:
– Before changing the current TV color
setting, ensure that your TV supports the
‘selected TV System’.
– If there is no proper picture on your TV,
wait for 15 seconds for auto recovery.
TIPS: The underlined option is the factory default setting.
Press W to go back to previous menu item. Press SYSTEM MENU to exit the menu item.
01-49 dvp7400_93_eng2.indd 2001-49 dvp7400_93_eng2.indd 20 2006-10-12 2:17:02 PM2006-10-12 2:17:02 PM