Filter
Top Products
English
41
DVD Menu Options (continued)
Advance Picture
This setting allows you to ne-tune the
following video parameters.
A In ‘Video Setup Page’, use S T keys to
highlight { Advance Picture }, then
press X.
B Press S T keys to highlight an option.
C Enter its submenu by pressing X.
D Press S T keys to select a setting and
press OK to con rm.
ADV PICTURE SETUP
DCDI
GAMMA
CHROMA DELAY
P-SCAN FORMAT
HDMI VIDEO
TRUE LIFE
{ DCDi } (for Progressive Scan output only)
DCDi (Directional Correction
Deinterlacing) computes and tracks the
angle of edge to ll in the missing pixels
on the TV screen.
– { On }
Optimize the picture quality signi cantly,
especially during the slow motion
playback.
– { Off }
Select this to disable DCDi function.
{ Gamma } (for Component video output
only)
Enables you to adjust the intensity of the
picture non-linearly. A positive value
enables you to bring out low level detail
in dark scenes, while a negative value
emphasizes contrast.
– { -7 }
{ 0 } { +7 }
{ Chroma Delay } (for Component video
output only)
The chroma (color) and lume (brightness)
signals are not synchronized. This setting
allows you to adjust the advance delay of
the chroma signal to yield a perfectly
clear picture.
– { -3 }
{ 0 } { +3 }
{ PSCAN Format } (for Progressive Scan
output only)
Select this to adjust the ratio of the
pictures on the TV screen.
– { Superwide }
Select this for display of 4:3 image on
16:9 TV with non-linear stretching
(center portion of screen is stretch less
than the side).
– { 4:3 Pillar Box }
Select this for display of 4:3 image on
16:9 TV without streching (a black pillar
will be applied to both left and right side)
– { Off }
No aspect ratio adjustment is made when
this option is selected.
TIPS: The underlined option is the factory default setting.
Press W to go back to previous menu item. Press SYSTEM MENU to exit the menu item.
01-49 dvp7400_93_eng2.indd 4101-49 dvp7400_93_eng2.indd 41 2006-10-12 2:17:24 PM2006-10-12 2:17:24 PM