Filter
Top Products
English
36
DVD Menu Options (continued)
TIPS: The underlined option is the factory default setting.
Press W to go back to previous menu item. Press SYSTEM MENU to exit the menu item.
Using the Audio setup menu
A Press SYSTEM MENU on the remote
control.
The system setup menu appears.
AUDIO SETUP PAGE
ANALOG OUTPUT
DIGITAL AUDIO
HDMI AUDIO
SPEAKER SETUP
CD UPSAMPLING
NIGHT MODE
LIP SYNC
B Press W X to select { Audio Setup
Page }, then press OK.
C Press S T to select an item, then press
X to access.
Example: { Night Mode }
The options for the selected item
appears.
If the selection in the menu is greyed
out, that means the feature is not
available or not possible to change at
the current state.
D Use S T to select a setting and press
OK to con rm.
Example: { On }
The setting is selected and setup is
complete.
E To exit, press SYSTEM MENU.
Analog Output
This audio mode outputs the sound from
the front left and right speakers and
subwoofer. It downmixed all sound
surround format to standard two channel
(stereo).
A In ‘Audio Setup Page’, use S T keys to
highlight { Analog Output }, then press
X.
{ Stereo }
Select this when output delivers sound
from only the two front speakers.
{ Multi-channel }
Select this to enable multi-channel
output. Dolby Pro Logic II will be
activated if a 2 channel recorded disc is
being played back.
B Use S T keys to select a setting and
press OK to con rm.
Tip:
– Multi-channel and downmixed stereo
output are not available simultaneously.
01-49 dvp7400_93_eng2.indd 3601-49 dvp7400_93_eng2.indd 36 2006-10-12 2:17:20 PM2006-10-12 2:17:20 PM