Filter
Top Products
English
38
Speaker Setup
This menu contains setup options for
your audio output which makes the
speaker setup system reproduce high
quality surround sound. For details, see
page 22.
CD Upsampling
You can convert your music CD to a
higher sampling rate using complicated
digital signal for better sound quality. If
CD upsampling is activated, the DVD
player will automatically switch to stereo
mode.
A In ‘Audio Setup Page’, use S T keys to
highlight { CD Upsampling }, then press
X.
{ Off }
Select this to disable the CD Upsampling
function.
{ 88.2 kHz (x2) }
Select this to convert the CD sampling
rate twice higher than the original.
{ 176.4 kHz (x4) }
Select this to convert the CD sampling
rate four times higher than the original.
B Use S T keys to select a setting and
press OK to con rm.
Tip:
– CD Upsampling feature is only applicable
in stereo output setting.
Night Mode
This mode optimises playback of sound at
low volume. High volume outputs will be
softened and low volume outputs are
brought upward to an audible level.
A In ‘Audio Setup Page’, use S T keys to
highlight { Night Mode }, then press X.
{ On }
Select this to set low volume output. This
feature is only available for movie discs
with Dolby Digital mode.
{ Off }
Turns off night mode feature. Select this
to enjoy the surround sound with its full
dynamic range.
B Use S T to select a setting and press
OK to con rm.
Lip Sync
This allows you to adjust the audio delay
(ms) with respect to the video output for
the lip synchronization.
A In ‘Audio Setup Page’, use S T keys to
highlight { Lip Sync }, then press X.
Use W X to adjust the following
options; { 0ms } { 200ms }
B Press OK to con rm.
TIPS: The underlined option is the factory default setting.
Press W to go back to previous menu item. Press SYSTEM MENU to exit the menu item.
DVD Menu Options (continued)
01-49 dvp7400_93_eng2.indd 3801-49 dvp7400_93_eng2.indd 38 2006-10-12 2:17:21 PM2006-10-12 2:17:21 PM