Filter
Top Products
English
24
Starting disc playback
A Press SELECT on the remote control
until ‘DVD’ is lighted on the remote
control display (see remote control, page
18).
B Turn on the TV to the correct
programme number for the DVD player
(e.g. ‘EXT’, ‘0’, ‘AV’).
C Press STANDBY-ON 2 to turn on
the DVD player.
D Press OPEN CLOSE on the front of
the DVD player.
E Place a disc into the disc tray with the
label facing up, then press OPEN
CLOSE.
For double-sided discs, load the side
which you want to play facing up.
F Playback may start automatically.
If not, press PLAY X.
If a disc menu appears on the TV, see
page 25 'Using the Disc Menu'.
If the child lock was activated for the
inserted disc, you have to enter your six-
digit password (see page 44).
For more playback features, see pages
24~32.
Playback Features
TIPS: The operating features described here might not be possible for certain discs.
Always refer to the instructions supplied with the discs.
Basic playback controls
Unless otherwise stated, all operations
described are based on Remote Control
use.
Pausing playback
A
During playback, press PAUSE Å to
pause playback and display a still picture.
Sound will be muted.
B Press PAUSE Åagain to select the next
picture frame.
C To resume normal playback, press
PLAY X again.
Selecting title/chapter/track
Press . / > or use alphanumeric
keypad (0-9) go to the previous or next
title/chapter/track.
The playback skips to the selected
title/chapter/track.
During repeat playback of a title/chapter/
track, pressing . / > will replay the
same title/chapter/track.
Stopping playback
Press STOP
.
Tips:
– Screen saver will start automatically if the
disc playback is stopped for 15 minutes.
– The player will automatically switch to
Power Standby mode if you do not press any
buttons for 30 minutes after the disc has
stopped playing.
01-49 dvp7400_93_eng2.indd 2401-49 dvp7400_93_eng2.indd 24 2006-10-12 2:17:11 PM2006-10-12 2:17:11 PM