Filter
Top Products
EN
EN-13
Installing digital channels manually
You can manually scan services by keying in
the frequency of your target channel.
If you are in analogue mode, switch to
digital mode by pressing the
key on
the remote control.
Press the key to display the setup
menu.
Select Service setup, and press the Æ
key.
Select Manual install services, and
press the Æ key.
Add new services
Reinstall all services
Setup
11:28
Manual install services
Installation > Service setup
Close
Frequency
Network name
Signal quality
Signal strength
Services found
Store
Discard
Manual install services
Press the to keys to key in
the frequency of your target channel, and
press
u key to start the search.
When the search is complete, press the
u key to accept the new service.
Press the Í key to return to the
previous menu.
Press the
key to exit the menu.
Testing your TV reception
This menu allows you to check the strength
of the signal that you are receiving through
your aerial.
From the digital mode, press the
key to display the setup menu.
1.
2.
3.
4.
5.
6.
7.
8.
1.
Press the ï key to select Installation,
and press the Æ key.
.
Frequency
Network name
Service lists
Service setup
Test reception
Setup
11:28
Test signal quality
Installation
Close
Signal quality
Signal strength
Press the ï key to select Test
reception, and press the Æ key. The
programme frequency, the network
name, the signal quality, and the signal
strength are displayed.
Press the Æ key to enter the
Frequency, and press the
to
keys to enter the frequency of the digital
channel that you want to test.
- Press the Æ key to move to the next
character space.
- If the test reception indicates that the
signal strength is poor, adjust or update
your aerial. Contact a professional aerial
installer for best results.
After keying in the frequency, press the
u key to exit Frequency.
Press the Í key to return to the
previous menu.
Press the key to exit the menu.
2.
3.
4.
5.
6.
7.
Setting up TV and radio channels (cont.)