Filter
Top Products
EN
EN-23
You can automatically search for and store
analogue channels.
If you are in digital mode, switch to
analogue mode by pressing the
key
on the remote control.
Press the
key to display the Main
menu.
Brightness
Colour
Contrast
Sharpness
Colour Temp
More Option...
Main
Picture
Sound
Ambilight*
Features
Install
* Available in selected models
Press the Î or ï key to select Install,
and press the Æ or u key to enter the
Install menu.
Auto Store
Manual Store
Sort
Name
Favourite Program
Main
Picture
Sound
Ambilight*
Features
Install
* Available in selected models
Select Auto Store, and the press the
Æ or
u key to automatically search for
channels.
All of the available channels are stored.
The auto store operation takes a few
minutes. The following display shows the
progress of the search and the number
of channels found.
1.
2.
3.
4.
Auto Store
Program 3
TV 196 MHz
To exit or interrupt the search before it is
complete, press the
key.
If you interrupt an auto store, not all of the
channels are stored. To store all channels,
restart the auto store again.
Automatic Tuning System (ATS)
If the transmitter or cable network sends
an automatic sort signal, the programmes
are numbered correctly. In this case, the
installation is complete. If an automatic sort
signal is not available, you can use the Sort
menu to number the programmes.
Automatic Channel Installation (ACI)
If a cable system or a TV channel that
broadcasts ACI is detected, a programme list
appears. If ACI is not available, the channels
are numbered according to your selected
language and country. If ACI is not available,
you can use the Sort menu to renumber the
channels.
Note: You cannot change the language
or country in analogue mode. To change
the language or country, exit the analogue
mode and enter the digital mode. For more
information, see Selecting your language and
location on page 14.
Tuning analogue channels automatically