Filter
Top Products
EN
EN-43
Below is a list of symptoms you may encounter with your TV. Before you call for service,
make these simple checks.
Troubleshooting
Symptom Possible solutions
No display on
screen
Check whether power cord is properly connected to the mains
socket and to your TV. If there is still no power, disconnect the
plug. Wait for 60 seconds and re-insert the plug. Switch the TV
on again.
Press the
key on the remote control.
•
•
Poor reception
(snowy noise)
Check the aerial connection to the TV and to the wall aerial
socket.
Try manually adjusting your picture (see page 24).
Have you chosen the right TV system? (see to page 24).
•
•
•
No picture Verify the supplied cables are connected properly (The aerial
cable to the TV, the other aerial to your recorder, the power
cables,....).
Verify you have selected the correct source.
Verify whether the child lock has been switched off.
•
•
•
No sound on
certain channels
Check whether the correct TV system is selected (see page 24).•
No sound Verify that the volume is not at the minimum.
Check that the mute (
) mode is not on. If mute mode is on,
press the
key to deactivate mute mode.
Verify the connections between the peripheral equipment and
the TV.
•
•
•
Sound interference Try switching off any electrical appliances to prevent
interference, for example, hairdryer, vacuum cleaner.
•
Unable to
understand the
selected language
on screen to
operate set in
digital mode
Press the
key to exit menu from screen
Press the
key again to display menu.
Press the
key to select the second item on the menu. Press
the
key to enter into the next menu level.
Press the
key again. Press the key to select the fifth menu
item.
Press the key to enter into the next menu level.
Press the Î or ï key to select correct language.
Press the
u key to confirm your selection.
Press the key to exit menu.
•
•
•
•
•
•
•
•
TV not responding
to remote control
Move closer to the sensor at the front of the TV.
Check the placement of the batteries.
Change the batteries.
•
•
•