Filter
Top Products
EN-4
Two people are required to lift and
carry a TV that weighs more than 25
kilogrammes. Improper handling of the
TV can cause serious injury.
If you place the TV set on a surface,
ensure the surface is level and that it can
withstand the weight of the TV.
Mounting the TV on the wall requires
special skill that should only be
performed by a qualified personnel.
You should not attempt to do the work
yourself. Philips bear no responsibility
for improper mounting or mounting that
results in accident or injury.
This TV is compatible with the VESA
wall mounting standard. Please contact
your local electronics retailer for a VESA
compliant bracket to wall mount this TV.
Before you mount your TV on a wall,
ensure the wall is suitable to carry the
weight of the TV.
Wherever you place or mount the
TV, ensure that air can circulate freely
through the ventilation slots. Do not
place the TV in a confined space.
Do not place naked flame sources such
as lighted candles close to the TV.
Do not expose the TV or the batteries
of the remote control to heat, direct
sunlight, rain, or water.
X
X
Do not place a vessels filled with water
on top of or near to the TV. Spilling
water into the TV can result in electric
shock. If you spill water into the TV,
do not operate the TV. Immediately
1.
2.
3.
4.
5.
6.
7.
8.
disconnect the TV from the mains and
have the TV checked by a qualified
technician.
Do not touch any part of the TV, power
lead, or aerial lead during lightning
storms.
Do not leave the TV in standby mode
for an extended period of time. Instead,
disconnect the TV from the mains.
The TV set is always connected to the
mains. You can disconnect the TV from
the mains by doing one of the following
tasks:
• unplugging the mains cord located at
the back of TV set
• unplugging the mains plug from the
mains socket outlet
Pull the power cord by the plug - do not
pull on the power cord.
Ensure that you always have easy access
to the mains cord or the mains plug to
disconnect the TV from the mains.
Ensure the power cord is fully inserted
into the TV mains socket and the wall
socket.
If the TV is mounted on a swivel base
or swivel arm, ensure no strain is placed
on the power cord when the TV is
swivelled. Strain on the power cord can
loosen connections and cause arcing or
fire.
Verify that the mains supply voltage in
your home corresponds to the voltage
printed on the sticker at the rear of the
TV.
9.
10.
11.
12.
13.
14.
15.
Safety