Filter
Top Products
EN-16
You can restrict access to digital channels.
Opting to use a pin code
If you are in analogue mode, switch to
digital mode by pressing the
key on
the remote control.
Press the key to display the setup
menu.
Press the ï key to select Access
restrictions, and press the Æ key.
Press the Æ key to enter into the Set
pin code protection menu.
On Off
Set pin code protection
Maturity rating
TV channels
Radio stations
Change pin code
Setup
Access restrictions
11:28
Switch pin code protection ‘on’ or ‘off’
Close
Press the Í or Æ key to select On, and
press the
u key to exit.
Warning: When you opt to use a
pin code, you must use that pin code
when you schedule a programme for
recording.
Press the Í key to return to the
previous menu.
Press the
key to exit the menu.
Changing your pin code
If you are in analogue mode, switch to
digital mode by pressing the
key on
the remote control.
Press the key to display the setup
menu.
Press the ï key to select Access
restrictions, and press the Æ key.
1.
2.
3.
4.
5.
6.
7.
1.
2.
3.
Press the ï key to select Change pin
code.
Press the Æ key to enter into the
Change pin code menu.
Follow the on-screen instruction to
change your pin code.
The default pin code is 1234.
If you forget your pin code, reset to the
default pin code by entering the universal
code 0711.
Options for restricting access to
digital channels
This list describes the submenu options for
access restrictions.
Maturity rating
To select a rating at which a programme
is blocked. This feature works only for
programmes that are broadcast with a
rating.
TV channels
To select a TV channel to block.
Radio stations
To select a radio station to block.
Change pin code
To change your pin code.
Using the Common Interface slot
Your TV is equipped with a Common
Interface (CI) slot. For information about
using the CI slot see Using conditional access
on page 22.
4.
5.
6.
•
•
•
•
Restricting access to digital channels