Filter
Top Products
Mechanical Instructions
EN 9FHP PDP 4.
4.1.6 LOGIC Board
Figure 4-11 LOGIC board removal (1/2)
Figure 4-12 LOGIC board removal (2/2)
Remove the circuit board by following the steps below. To
install the circuit board, reverse the removal procedure.
1. Unplug connectors [1].
2. Release the lock of the FPC connectors [2] and unplug the
signal cables.
3. Remove the screws [3] fixing the LOGIC board.
4. Remove the LOGIC board.
5. When installing the LOGIC board, put the board in such a
position that it is locked by the tabs [4] before fixing it with
the screws.
4.1.7 PSU Board
Figure 4-13 PSU board removal
Remove the circuit board by following the steps below. To
install the circuit board, reverse the removal procedure.
1. Unplug connectors [1].
2. Remove screws [2].
3. Remove the PSU.
G_16400_016.eps
310706
4
4
3
3
2
1
Logic
G_16400_017.eps
180706
E_06532_032.eps
270706
Not yet available