Filter
Top Products
English
26 One-Touch Recording
OTR (0:30)
SP
One-Touch Recording (OTR) lets you set a timed recording 30
minutes to 8 hours long of the current TV channel. Before you
begin:
● Place the DVD/VCR in VCR mode. Press VCR so VCR light
appears on the front of the DVD/VCR.
● Select a recording speed (SP, SLP) with SPEED.
● Put a videotape in the cassette compartment. Make sure the
tape’s record tab is intact and the tape is long enough to record
the program(s).
1
Press VCR,then press SKIP ∑/CH
K
or SKIP w/CH
L
or the Number buttons to select the channel you want
to record.
2
Press RECORD I repeatedly until the desired
recording length (30 minutes to 8 hours) appears
on the TV screen. Recording will begin.“REC” and “ ”
will appear on the DVD/VCR’s display panel.
Stopping an OTR
To stop an OTR before recording is finished, press STOP C on the
remote control or STOP/EJECT C A (VCR) on the front of the
DVD/VCR.
To cancel the OTR but continue recording, press RECORD I
repeatedly until REC appears in the upper left corner of the TV
screen, and “ ”
disappears.
When an OTR finishes, the DVD/VCR will either switch to DVD
mode or turn itself off. If it changes to DVD mode, press
STANDBY-ON y to turn it off.
After an OTR,“ ” flashes because the VCR is still on standby for
timer recordings. Press TIMER SET on the remote or
STOP/EJECT C A (VCR) on the DVD/VCR to cancel timer
standby and use the VCR normally again.
• The remaining recording time
will appear on the display panel
during an OTR. Press DISPLAY
to see it on the TV screen.
•To change the recording length
while an OTR is in progress,
press RECORD I repeatedly.
•You cannot pause an OTR.
• If the preset time for a timer
recording comes up during an
OTR, the OTR has priority.The
timer recording will not take
place.
• If the end of the tape is reached
during an OTR, the VCR will
stop recording, eject the tape,
and switch to DVD mode or
turn off.
• If one or more Timer
recordings are on standby when
one OTR ends, the DVD/VCR
will turn off automatically and
“
” will appear on the
DVD/VCR's display panel
indicating that it is now ready
for another timer recording.
Helpful Hints
1
2
STANDBY-ON
PLAY
DVD
VCR VCR/TV
OK
MENU MENU
DISC/VCR
RETURN TITLE
A-B
CLEAR/RESET SLOW
SUBTITLE ZOOM
ANGLE
REPEAT REPEAT
AUDIO
SEARCH MODE
DISPLAY
SKIP / CH
SYSTEM
PAUSESTOP
MARKER RECORDTIMER SET
SPEED
1 2 3
7
6
5
4
8
9
0
+10
When an OTR ends
The DVD/VCR will turn off and “ ” on the DVD/VCR's display
panel will flash indicating that the recording is complete, or it may
switch to DVD mode automatically. Press TIMER SET to use the
DVD/VCR as usual.
H982NUD_EN1 3/2/06 6:56 PM Page 26