Filter
Top Products
English
Special Effects Playback 33
●
Before you begin, press VCR so VCR light appears on the front of the
DVD/VCR.
Forward and Reverse Searching (SP/LP/SLP) /
Super High Speed Searching (LP/SLP)
1
During tape playback, press and release g or h.
A fast forward or reverse picture search will begin.
Press g or h, then press again. The search speed
will increase. Repeatedly pressing g or h will switch
between regular and high speed searching.
2
To return to normal playback, press PLAY B.
Viewing a Still Picture
1
During tape playback, press PAUSE k. A still picture
will appear on the screen.
2
To advance the still picture one frame at a time,
press PAUSE k repeatedly.
3
To release the still picture and return to playback,
press PLAY B.
Viewing a Slow Motion Picture
1
During tape playback, press SLOW. The tape will play
in slow motion.
2
To return to normal playback, press PLAY B.
• Slow and Still modes will switch
to Stop mode after 5 minutes
to protect the DVD/VCR and
the tape from damage.
•
SP/LP/SLP means this feature will
work with tapes recorded in
Standard Playback, Long Playback or
Super Long Playback. LP/SLP means
this feature will work with tapes
recorded in Long Playback or Super
Long Playback.Tape speed details
are on page 60.
Helpful Hints
PLAY
DVD
VCR VCR/TV
OK
MENU MENU
DISC/VCR
RETURN TITLE
A-B
CLEAR/RESET SLOW
SUBTITLE ZOOM
ANGLE
REPEAT REPEAT
AUDIO
SKIP / CH
SYSTEM
PAUSESTOP
MARKER RECORDTIMER SET
SPEED
1 2 3
The following tape features are available in VCR mode. Press VCR so VCR light appears on the front of the DVD/VCR, if
necessary.
Automatic Playback
When you put a tape in the DVD/VCR, the power will come on. If the tape’s record tab is missing, playback will begin.
If a timer recording is set and “ ” is flashing in the display panel, the power will not come on automatically when
you insert a tape with the record tab intact.
If a timer recording is set and “ ” is flashing in the display panel, the DVD/VCR will eject the tape if the record
tab is missing.
Automatic Rewind, Eject
When a tape is played, fast forwarded or recorded to its end, the tape will rewind to the beginning, stop and eject
itself.This feature does not operate if AUTO REPEAT is ON. Details are on page 31.
Ta pe Eject
A tape can be ejected with the DVD/VCR power on or off (but the DVD/VCR must be plugged in).
If a timer recording is set and “ ” appears on the display panel, pressing STOP/EJECT C A (VCR) will turn on
the DVD/VCR and/or cancel the timer recording. Press STOP/EJECT C A (VCR) again to remove the tape.
Remember to insert a tape and press TIMER SET to reset the timer recording.
Automatic Tracking Adjustment
The VCR adjusts tracking automatically to give you the best possible picture quality.With some recordings, however,
you may get a better picture using manual tracking.
Manual Tracking
To manually adjust the tracking during normal playback and slow motion playback of a videotape, press
SKIP ∑/CH
K
or SKIP w/CH
L
on the remote.Tracking will return to Automatic Tracking when you press STOP
C or insert a tape.You can also press SKIP ∑/CH
K
or SKIP w/CH
L
to remove vertical jitter in a Still picture.
Automatic Operation Features
H982NUD_EN1 3/2/06 6:56 PM Page 33