Filter
Top Products
English
– 13 –
EN / 2A01
CONNECTIONS
Use an audio coaxial digital cable or an audio optical cable (available from your dealer) for the audio connection
.
• If you use the OPTICAL connector, remove the protective cap.
NOTE
• The audio source on a disc in a 5.1 channel Dolby Digital surround format cannot be recorded as digital
sound.
• Be sure to turn off the power to all components in the system before connecting another component.
• Refer to the Owner’s Manuals for the components to be connected to this unit.
• Set Dolby Digital and DTS to Off for audio output in the setup mode. Playing a DVD using incorrect settings
may generate noise distortion, and may also damage the speakers.
• OPTICAL and COAXIAL connectors are only useful in DVD mode and have no function in HDD mode.
CONNECT TO AN AMPLIFIER EQUIPPED WITH
DIGITAL INPUT CONNECTORS
Hint for Optical cable (not supplied)
• Optical cable (not supplied) may be damaged when bent at sharp angles. Ensure cables are coiled in
loops with a diameter of 15 cm or more when storing them.
• Use a cable which is 3m or shorter.
• Insert cable plugs firmly into the connectors when making connections.
• If a plug has minor scratches or is dirty, clean it with a soft cloth before inserting it into a connector.
• Replace the protective cap on the OPTICAL connector when it is not in use.
ANT.
OUTPUT
DVD
DIGITAL OUT
OUT
IN
SCART1 (TV)
SCART2 (DEC.)
R
L
YC
COAXIAL
OPTICAL
to 21-Pin Scart connector
[Back of the HDR1000]
To COAXIAL DIGITAL AUDIO INPUT connector
To OPTICAL DIGITAL AUDIO INPUT
connector
To OPTICAL
DVD DIGITAL
OUT connector
Amplifier equipped with digital
input connectors
OR
To SCART1 connector
To Y/C
OUTPUT connector
OR
To COAXIAL
DVD DIGITAL
OUT connector
To Y/C INPUT
connector
E4310.QX3 02.8.22 11:19 AM Page 13