Filter
Top Products
English
– 23 –
EN / 2A01
CHANGE THE SETTINGS
Modulator
Changing of the modulator setting might be necessary
if your HDR1000 is connected to the TV via the coaxi-
al cable, and TV channel 36 / frequency 591 MHz is
used for broadcasting, or interference lines appear on
the picture.
• Before you begin, press HDD button so that the
blue HDD light appears on the front panel on the
HDR1000.
Display “Menu”
screen.
• Press MENU button.
Select “Tuner
Setup”.
• Press K or L button.
Then, press OK button.
Select
“Modulator”.
• Press K or L button.
Then, press OK button.
Move the cursor
to setting posi-
tion.
• Press B button to move
the cursor.
Set “System”.
• Press K or L button to
select your desired
System.
(You can select “PAL G”, “PAL I”, or “Off”.)
Then, press B button twice to move the cursor.
• If you don’t have clear picture or sound interference
despite optimisation, select “Off”.You can switch off
the built-in modulator.
Warning:
Only switch off the modulator if you have connected
the HDR1000 to a TV with a scart cable. Without a
scart cable you will not receive a picture from the
HDR1000 to the TV set when the modulator is
switched off.
MODULATOR SETUP
Menu
Small Screen
Basic Setup
Tuner Setup
Menu
Small Screen
Basic Setup
Tuner Setup
Tuner Setup
Small Screen
Auto Search
Manual Search
Sort TV Programs
Modulator
Modulator
System PAL G
Frequency out 591MHz
Store
Small Screen
Select frequency for “Frequency
out”.
• Press K/L
,
or Number
buttons to select your
desired program.
(You can select from 559
to 623MHz.)
Then, press B button to move the cursor.
Save the data.
• Confirm that “Store” is
selected.
Then, press OK button.
Set TV tuner to the frequency which
you select at step [6].
• Select the program number on your TV that you
want to use to watch the HDR1000.
Manually start the TV’s frequency / channel search
system as if you wanted to find a new TV frequency
/ channel.
Keep searching until the picture as shown in step
[7] is seen.
• Consult your TV manual on details if needed.
Exit the setting mode.
• Press MENU button or press RETURN button
repeatedly to exit.
599MHz599MHz
Modulator
System PAL G
Frequency out
Store
Small Screen
591MHz
Modulator
System PAL G
Frequency out
Store
Small Screen
599MHz
Modulator
System PAL G
Frequency out
Store
Small Screen
599MHz
• You cannot select Tuner Setup menu at step [2]
during recording or playback.
Helpful Hints
E4310.QX3 02.8.22 11:19 AM Page 23