Filter
Top Products
English
– 21 –
EN / 2A01
CHANGE THE SETTINGS
TUNER SETUP
AUTO SEARCH
Although your HDR1000 can automatically store the
TV channels/frequencies under the program numbers
when you turn it on for the first time, you can set up
the programs at any time.
• Before you begin, press HDD button so that the
blue HDD light appears on the front panel on the
HDR1000.
Display “Menu”
screen.
• Press MENU button.
Select “Tuner
Setup”.
• Press K or L button.
Then, press OK button.
Select “Auto
Search”.
• Press K or L button.
Then, press OK button.
Start to “Auto
Search”.
• Wait until the status bar
reaches 100%. It will
take up to 15 minutes.
When this is complete,
the Auto Search menu
will disappear from the TV screen. Now when you
press P(PROG)+ or - buttons, you can only select
programs containing a TV frequency.You can also
select program by pressing Number buttons.
• To cancel the Auto Search, press CLEAR button.
Menu
Small Screen
Basic Setup
Tuner Setup
Menu
Small Screen
Basic Setup
Tuner Setup
MANUAL SEARCH
Each program can be tuned manually and individual-
ly.
• Before you begin, press HDD button so that the
blue HDD light appears on the front panel on the
HDR1000.
Display “Menu”
screen.
• Press MENU button.
Select “Tuner
Setup”.
• Press K or L button.
Then, press OK button.
Select “Manual
Search”.
• Press K or L button.
Then, press OK button.
Move the cursor
to setting posi-
tion.
• Press B button to move
the cursor.
Set “Preset”.
• Press K/L or Number
buttons to select the pre-
set number you want to
program.
(You can select preset number 01-99.)
Then, press B button twice to move the cursor.
Set “System”.
• Press K or L button to
select the TV System.
(You can select “PAL B/G”,
“SECAM B/G, “SECAM L”,
or “PAL I”.)
Then, press B button twice to move the cursor.
Tuner Setup
Small Screen
Auto Search
Manual Search
Sort TV Programs
Modulator
Auto Search
Please wait
0% 100%
Stop : CLEAR
Menu
Small Screen
Basic Setup
Tuner Setup
Menu
Small Screen
Basic Setup
Tuner Setup
Tuner Setup
Small Screen
Auto Search
Manual Search
Sort TV Programs
Modulator
Manual Search
Small Screen
Preset P01
System ---
Frequency --- MHz
Fine Tuning 0
Name ---
Decoder Off Store
Manual Search
Small Screen
Select : KL
{B
Preset P08
System ---
Frequency --- MHz
Fine Tuning 0
Name ---
Decoder Off Store
Manual Search
Small Screen
Select : KL
{B
Preset P08
System PAL B/G
Frequency --- MHz
Fine Tuning 0
Name ---
Decoder Off Store
• You cannot select Tuner Setup menu at step [2]
during recording or playback.
• Non-Interlace and NTSC is not supported.
• Remember to check the timer review if the tuner
has been changed and timers have already been
programmed.
Helpful Hints
E4310.QX3 02.8.22 11:19 AM Page 21