Filter
Top Products
EN16
CONNECTIONS
The Philips Blu-ray Disc Home Theater is simple to install. However, proper system placement is critical to ensure an
optimum sound experience.
1) Place the main unit near to the TV.
2) Place the speakers system at normal listening ear-level and directly parallel to the listening area.
3) Place the subwoofer at the corner of the room or at least 1 meter away from the TV.
(Supports up to 1080i
(*1)
, 1080p
(*2)
, 1080p/24 resolution.)
(*1)
1080i : Outputs the video data with frame rate of 30 frames per second.
(*2)
1080p : Outputs the video data with frame rate of 60 frames per second.
Placing the Speakers
Note
• The placement diagram shown here is only a guideline that provides great system performance. You may find other
placement choices that are more suitable for your room layout that provide the sound experience you enjoy.
• To avoid magnetic interference, never position the front speakers too close to your TV.
• The rear speakers are labeled as REAR LEFT or REAR RIGHT.
• The front speakers are labeled as FRONT LEFT or FRONT RIGHT.
• For speaker setup, refer to “Speaker Setup” on page 41.
Connection to the TV
1
Choose the appropriate connection, then proceed to the corresponding
instruction (A, B or C) on the pages 17-18.
Best
HDMI IN
A
Video
Audio
HDMI cable
Your TV
Go To
No supplied cables are used in this connection:
Please purchase the necessary cables at your local store.
Use an HDMI cable with the HDMI logo (a certified HDMI cable) for this connection.
High Speed HDMI cable (also known as HDMI category 2 cable) is recommended for better compatibility.
E1S07UD_E1S08UD_EN.book Page 16 Monday, January 31, 2011 2:42 PM