Filter
Top Products
55EN
EN
OTHER SETTINGS
You can change the active source mode to the desired
external audio inputs and enjoy audio from the connected
device with the multi-channel surround sound
capabilities.
1) Press [ (home)] to access the home menu.
2) Use [K / L] to select “External audio input”, then
press [OK].
3) Use [K / L] to select the desired source mode, then
press press [OK].
“Aux1”:
Set the active source mode to the AUDIO IN(AUX1).
“Aux2”:
Set the active source mode to the AUDIO IN(AUX2).
“Coaxial”:
Set the active source mode to the DIGITAL AUDIO IN
(COAXIAL).
“MP3 Link”:
Set the active source mode to the MP3 LINK jack.
4) Press [BACK U] to go back to the previous screen,
or press [ (home)] to go back to the home menu.
The sleep timer enables the unit to switch to the standby
mode automatically after the selected preset time.
To set the sleep timer :
Press [SLEEP] repeatedly to select the desired preset
time.
“SLP OFF”:
Turns off the sleep timer.
“SLP 15”:
Set the preset turn-off time to 15 minutes.
“SLP 30”:
Set the preset turn-off time to 30 minutes.
“SLP 60”:
Set the preset turn-off time to 60 minutes.
“SLP 90”:
Set the preset turn-off time to 90 minutes.
“SLP 120”:
Set the preset turn-off time to 120 minutes.
“SLP 150”:
Set the preset turn-off time to 150 minutes.
To check or change the setting :
Press [SLEEP] once to display the remaining time.
To change the setting, press [SLEEP] repeatedly until your
desired preset time is displayed.
To cancel sleep timer :
Press [SLEEP] repeatedly until “SLP OFF” is displayed.
Switching Active Source Mode
Note
• You can also change the active source mode by
pressing [SOURCE] repeatedly.
(Home Menu (Disc / SD card), “Aux1”, “Aux2”,
“Coaxial”, “MP3 Link” or “FM”.)
Sleep Timer
Note
• The sleep timer will be activated even if the unit is in
operation.
•Pressing [SLEEP] does not work while the settings
menu is displayed.
Introduction Connections Basic Setup Playback OthersFunction Setup
E1S07UD_E1S08UD_EN.book Page 55 Monday, January 31, 2011 2:42 PM