Filter
Top Products
43
LIST OF SETTINGS
EN
EN
Category Menus / Options Description
Advanced Setup
Others Network Connection
• Refer to pages 49-52
for more
information.
Connection
Test
Perform a network connection
test. After you change IP address
or DNS setting, always perform
this test.
Enable(Easy)
If you select “Enable(Easy)”,
Connection test will automatically
start.
Enable
(Custom)
IP Address
Setting
Auto(DHCP) Set the IP address.
In most cases, you can connect to
the Internet without making any
changes to the default setting.
Manual IP Address
Subnet Mask
Default
Gateway
DNS
Setting
Auto(DHCP) Set the DNS setting.
In most cases, you can connect to
the Internet without making any
changes to the default setting.
Manual Primary DNS
Secondary
DNS
Proxy
Setting
Do Not Use Set the proxy server.
In most cases, you can connect to
the Internet without using proxy
server.
Use Proxy
Address
Proxy Port
Connection
Speed
Auto Set the connection speed.
In most cases, you can connect to
the Internet without making any
changes to the default setting.
10BASE Half
10BASE Full
100BASE Half
100BASE Full
BD-Live
Setting
Allow You can restrict Internet access
when BD-Live functions are used.
Limited Allow
Prohibit
Network Status You can check the current status of
the network setting.
Disable Yes Deactivate the network
connection.
No
Disclaimer Displays the network service
disclaimer.
Software Upgrade
• Refer to page 53 for
more information.
Disc
Upgrade
Yes Set the disc upgrade.
You can upgrade the software
version by using a disc.
To download the latest software
version, please visit
www.philips.com/support.
No
Network
Upgrade
Yes Set the network upgrade.
You can upgrade the software
version by connecting this unit to
the Internet.
No
Introduction Connections Basic Setup Playback OthersFunction Setup
E1S07UD_E1S08UD_EN.book Page 43 Monday, January 31, 2011 2:42 PM