Filter
Top Products
41
English
Tuner Operations (continued)
Using automatic preset
Use automatic presetting to store or
reinstall all the preset radio stations.
A Press TUNER to select “FM” or “MW”
band.
B Hold down PROGRAM until
“START ...” appears on the display panel.
All previously stored radio stations
will be replaced.
Using manual preset
Use manual presetting to store your
favourite radio stations.
A Tune to your desired radio station (see
“Tuning to radio stations”).
B Press PROGRAM.
C Use ./ > keys to select a preset
number that you want to store the
current radio station.
D Press PROGRAM to store.
Selecting a preset radio station
A Press TUNER to select “FM” or “MW”
band.
B Use ./ > keys to select a preset
number (or use the numeric keypad on
the remote control).
The waveband, preset number
followed by the radio frequency will
appear on the display panel.
Deleting a preset radio station
A In tuner mode, use ./ > keys to
select a preset radio station.
B Hold down Ç until “FM/MW X
DELETED” appears.
“X” is the preset number.
The radio station continues to play
but has been deleted from the preset list.
The rest of the preset radio stations
remain unchanged.
Changing tuning grid
(not available for all versions)
In some countries, the frequency step
between adjacent channels in the MW/FM
band is 9 kHz/ 50 kHz (10 kHz/ 100 kHz
in some areas).
IMPORTANT!
Changing the tuning grid will erase
all previously stored preset radio
stations.
A Press SOURCE to select “FM” or
“MW”.
B Press STANDBY ON to switch the
DVD system to standby mode.
C Press STANDBY ON and PLAY X
together on the front panel to power up
the DVD system.
The display will show “GRID 9” or
“GRID 10”.
Helpful Hint:
– GRID 9 and GRID 10 indicate that the
tuning grid is in step of 9 kHz and 10 kHz
respectively.