Philips MCD388/12 DVD Player User Manual


 
27
[Password Setup] > [Password Setup Page] >
[Password]
You can change password here. The default
password is 1234.
[Change]
1) Press the numeric keys to enter ‘1234’ or
your last set password at [Old Password]
field.
2) Enter the new password at [New
Password] field.
3) Enter the new password again at [Confirm
PWD] field.
4) Press OK /
to exit the menu.
Note
If you forget the password, enter ‘1234’ before
you set a new password.
Note
If the language you have set is not available on
the disc, the disc uses its own default language.
For some discs, the subtitle/audio language can
only be changed from the disc menu.
[Parental]
Restricts access to discs that are unsuitable
for children. These types of discs must be
recorded with ratings.
Press OK / .
Select a rating level, then press OK /
.
Press the numeric keys to enter the
password.
Note
Rated discs above the level you set in
[Parental] require a password to be played.
The ratings are country-dependent. To allow
all discs to play, select [8 ADULT].
Some discs have ratings printed on them but
are not recorded with ratings. This function
has no effect on such discs.
Tip
You can set or change the password. (See
“Preference setup - Password setup”.)
[Default]
Resets all the settings of this unit to factory
default, except for the password and parental
settings.
[Password Setup] > [Password Setup Page] >
[Password Mode]
This setting allows you to enable/disable the
password for parental control. If the password
is enabled, when you play a prohibited disc,
this 4-digit password is required.
[On] - Enable the password for parental
control.
[Off] - Disable the password for parental
control.
English
EN