Philips MCD388/12 DVD Player User Manual


 
36
The formats of these files are not
supported.
USB device or SD/MMC card not supported
The USB device or SD/MMC card is
incompatible with the apparatus. Try
another one.
Timer does not work
Set the clock correctly.
Switch on the timer.
Clock/timer setting erased
Power has been interrupted or the power
cord has been disconnected.
Reset the clock/timer.
Moisture has condensed inside the
system. Remove the disc and leave the
system turned on for about an hour.
Disconnect and reconnect the AC power
plug, and then turn on the system again.
As a power-saving feature, the system
turns off automatically 15 minutes after
disc play reaches the end and no control
is operated.
Poor radio reception
Increase the distance between the Micro
System and your TV or VCR.
Fully extend the FM antenna.
Connect an outdoor FM antenna instead.
Wireless connection fails.
Set up wireless connection manually.
Unable to select Progressive Scan
Ensure the video output mode is set to
[Pr/Cr Pb/Cb Y].
No sound on HDMI connection.
You may not hear any sound if the
connected device is non-HDCP
compliant or only DVI-compatible.
No picture on HDMI connection.
Check if the HDMI cable is faulty. Replace
a new HDMI cable.
If this happens when you change the
HDMI video resolution, select the correct
resolution until the picture appears.
Audio or subtitle languages cannot be set
The disc is not recorded with sound or
subtitles in multiple languages.
The audio or subtitle language setting is
prohibited on the disc.
Cannot display some files in USB device or
SD/MMC card
The number of folders or files in the USB
device or SD/MMC card has exceeded a
certain limit. This phenomenon is not a
malfunction.
EN