Filter
Top Products
EN
20
Scheduled TV program recording (timer recording) from standby is only possible if
the Media Center has been placed in standby mode using the remote control.
• Repeat the ‘Scheduling a TV program recording’ procedure. Use the remote
control to switch the Media Center to standby mode.
Scheduled TV program recording (timer recording) from a set-top box is only
possible if the set-top box is switched on (not in standby!).
• Switch on the set-top box and repeat the ‘Scheduling a TV program recording’
procedure.
Media Center System Recovery
To recover factory shipped applications, drivers and the operating system, use the
System Recovery feature.
1 Click Start on the Windows XP taskbar and click All programs.
2 Select the System Recovery folder and click System Recovery.
OR:
1 Restart the Media Center.
2 Pres F11 on Media Center’s keyboard, shortly after the reboot of Windows XP
starts.
> The Media Center System Recovery appears.
3 Select the required recovery option and follow the on-screen instructions.
Note: Be sure to back up your files before executing the System Recovery – Quick
Format option. All your personal data files and applications installed after the
Media Center was purchased, will be erased.
Troubleshooting
Scheduled TV program recording
(Timer recording) does not work.
Scheduled TV program recording
(Timer recording) from the set-top
box does not work.
Use_cases_English.qxd 01-08-2006 9:12 Pagina 20