Philips MCP9360I/22 DVD Player User Manual


 
27
4
Additional connections
1 Connect headphones with a 3.5 mm jack to the
HEADPHONE socket (13) on the front of the Media
Center.
2 Set the headphone volume with the
4 HEADPHONE VOLUME 3 keys (12).
You can mute the headphones sound with the Mute
(s) key (10) on the remote control.
Connecting headphones
Video
camera
Connect the Firewire (IEEE1394 / i.LINK) connector
of your camera to the FIREWIRE (IEEE1394 / Firewire
/ i.LINK) connector (16) on the front of the Media
Center. For this use a 4-pin firewire (IEEE1394 / i.LINK)
cable (not supplied).
OR:
Connect the USB connector of your camera to the
USB 2.0 input (15) on the front of the Media Center.
For this use a USB 2.0 cable (not supplied).
Notes:
Be sure to connect the camera to the Media Center before
starting the DV Capture program.
Be sure to exit the DV Capture program before disconnec-
ting the camera.
Please check to see if additional software is required to sup-
port your device. Install the drivers that came with your devi-
ce before connecting the device to the Media Center. For
this, see the user manual of the device.
Connecting a video camera (or other portable external source)
Connect a microphone to the MIC input (14) on the
front of the Media Center.
Connecting a microphone