Filter
Top Products
13
HOW TO
BLOCK
CHANNELS USING AUTOLOCK™
Remember that 0711 is the default AutoLock
TM
code. If your access code has been changed
by someone other than you (a child, for exam-
ple) or you have forgotten the code, you can
always get in by inputting the default code.
HELPFUL HINT
A
fter your personal access code has been
set (see the previous page), you are ready
to select the channels or inputs you want to
block out or censor.
1
Press the MENU button on the
remote control to show the onscreen
menu.
2
Press the CURSOR DOWN button
to highlight Features.
3
Press the CURSOR RIGHT button
to display the Features menu.
4
Press the CURSOR DOWN button
to highlight AutoLock™.
5
Press the CURSOR RIGHT button
again display the Acess Code menu
prompt.
6
Enter your four-digit ACCESS
CODE. Correct will flash very briefly
and the AutoLock™ will be accessible.
7
You can choose to block individual
channels or all channels at the same
time. For individual channels, press the
CURSOR RIGHT to enter the Lock
Channel menu.
8
Using the numbered buttons or the
CH+ or CH- buttons enter the chan-
nel you wish to lock.
Repeat step 8 for any channels you want to
lock.
9
To block all channels, press the CUR-
SOR DOWN button until Block All
is selected.
Press the CURSOR RIGHT button to
select On to activate the blocking of all
channels. To deactivate the blocking of
all channels, select Off.
Press the STATUS/EXIT button to
remove the menu from the screen.
10
OCK
CHANNELS
USING
AUTOLOCK
AutoLock
Block Channel Off
Lock HD
É
Change Code É
Clear All
É
Block All É
Movie Rating É
Ñ
É
AutoLock
Block Channel On
Lock HD
É
Change Code É
Clear All
É
Block All É
Movie Rating É
Ñ
É
Channel 2
Channel Blocking
Access Code
— — — —
Ñ
É
TV Menu
Picture • Timer
Sound • Autolock
Features • Contrast +
Install • DNR
Mode • PIP
Features
Timer
É
Autolock
É
Contrast +
É
DNR
É
PIP
É
Features
Timer
É
Access Code
Autolock
Contrast +
É
— — — —
DNR
É
PIP
É
Ñ
É
Features
Timer
É
Access Code
Autolock
Contrast +
É
* * * *
DNR
É
Correct
PIP
É
Ñ
É
2
3
5
4
1
6
8
7
10
11
9
11
NOTE TO PARENTS: It isn’t possible for
your child to unblock a channel without knowing
your access code or changing it to a new one. If
your code has been changed without your
knowledge, then you will become aware that
blocked channels may have been viewed.
If a channel is blocked by the
Block Channel or Block All
option, the TV will display the
above screen. To watch the chan-
nel, enter your access code or you
can change the Block Channel
option back to Off.