Filter
Top Products
28
REMOTE C
ONTROL USE WITH
ACCESSORY DEVICES - CODE ENTRY METHOD
N
ow that you have looked up the three-
digit Remote Code Number for your
brand of device, you are ready to follow the
four simple steps below.
Please read through steps 1-4 before begin-
ning.
1
Press the TV/DVD/AUX/ACC
SELECT button repeatedly to select
the desired mode.
2
Press the • RECORD button on the
remote control and release.
3
Press the AUTO SOUND button on
the remote within 30 seconds, then
release.
4
Enter the FOUR-DIGIT REMOTE
CODE NUMBER (page 30-32) for
your desired device. The remote is now
ready to send commands to the unit.
5
Point the remote at the Device. Press
the POWER button on the remote to
turn the unit ON. If this works you are
finished. If it does not work
the first
time, repeat the steps using a different
remote code number.
After a second try and the remote does not
operate your device, see if there is another
four-digit code number (pages 30-32) listed
for your device and repeat the steps above
using the new number.
If after repeated attempts the code number
method does not work you device, try the
SEARCH METHOD on the next page.
NOTE: Setting up the remote is for use with
external accessory devices only and not for use
with other television brands.
HELPFUL HINT
Satellite Receiver
or DBS, DVD
Cable Converter
1
3
2
5
4
VCR