Filter
Top Products
27
REMOTE CONTROL USE WITH ACCESSORY DEVICES - DIRECT METHOD
Y
our remote control is set to work your TV
and many infrared remote (IR) control
VCRs, Cable Boxes, Satellite Systems, DBS,
DVD, etc. However, an easy onetime step may
be necessary before the remote will work your
VCR.
Try this initial Direct Access Method to see if
going on to the following section is necessary.
1
Place the TV/DVD/AUX/ACC
SELECT button to select the desired
mode.
2
Point the remote control at the device
and press the POWER button.
Does the remote turn the device ON?
If YES, stop and try other function buttons on
the remote. If they also work the device, then
the remote is ready and no further steps are
needed.
If NO, continue...
3
First look up a FOUR-DIGIT remote
control number for your brand of
Device before going through the simple
steps on the following page.
Find your Four-Digit Code on pages
30-32.
If more than one number is listed, you may
have to try more than the first Four-Digit code
given in order to locate your Device’s remote
code.
NOTE: Setting up the remote is for use with
external accessory devices only and not for use
with other television brands.
HELPFUL HINT
Cable Converter
Satellite Receiver
VCR
1
2