Filter
Top Products
29
REMOTE C
ONTROL USE WITH
ACCESSORY DEVICES - SEARCH METHOD
Y
our TV remote can be set to work various
external devices such as VCRs, Cable
Boxes, Satellite Receivers, DBS, DVD, etc. by
what is called the search method of remote
control programming.
If the “Remote Code” number method shown
on the previous page did not set your remote
to work your external device, then follow the
easy steps listed below.
Please read steps 1-4 before beginning.
1
Press the POWER button on the
device your are attempting to program
to turn it ON.
2
Press the TV/DVD/AUX/ACC
SELECT button repeatedly to select
the desired mode.
3
Press the • RECORD and the AUTO
SOUND buttons simultaneously and
hold them down. The remote will con-
tinue to send programming codes, one
ever 1.5 seconds.
4
The device will begin to change chan-
nels after the remote identifies the cor-
rect code. When the channels start to
change release the • RECORD and
AUTO SOUND buttons. The remote
should be ready to operate the device.
This method can take several minutes to per-
form.
Don’t let the device scan up more than five
channels. If you do the remote may pass up
the right code and another search cycle will
have to be repeated.
If no channel change happens within two
minutes, repeat steps 1-4. Should a channel
change still not occur, the remote will not
work the desired device.
NOTE: Setting up the remote is for use with
external accessory devices only and not for use
with other television brands.
HELPFUL HINT
06
07
08
09
06
07
08
09
07
08
09
1
4
Cable Converter
Satellite Receiver
VCR
3
2
4
3