Filter
Top Products
21
Power–Standby
Press to turn the TV on or off. NOTE: The TV is never powered off com-
pletely unless it is unplugged.
Alternate Audio
When you tune to a channel where SAP (Second Audio Program) is avail-
able, you can toggle between Main and SAP. If not available, only Main can
be selected. (See page 42 in the Directions for Use.)
Surround Sound
Press to toggle the sound modes Incredible Surround™ and Dolby* Virtual.
(See page 41 in the Directions for Use.)
VCR Prog (functional only in VCR mode)
Many VCRs have an automatic programming function. If your VCR has this
function, the universal code set will assign it to this function. (See page 26 in
the Directions for Use.)
INFO +
Press to display (when available) information about the current channel, pro-
gram, source, number or name, local time, CC availability, SAP availability,
program ratings, display format, sound mode, and remaining length of a
Sleeptimer setting.
EXIT
Press this button to exit the menus provided by universal devices such as
VCRs, satellite receivers, DVD players, and so forth.
CC (Closed Captioning)
Press to select On, Off, or On with Mute. (See page 47 in the Directions for
Use.)
Cursor Up, Down, Right, and Left
Use to navigate the on-screen menu and make control adjustments or settings.
Additionally, use these buttons to pan the screen up or down to show any
excluded parts of the picture. Left or right panning is possible with the Side
input source when “Game” is selected as the type of source for the Side input.
(See page 18 in the Directions for Use manual.)
Also use with the Dual Screen/PIP feature to select a screen or reposition a
PIP screen.
Menu
Press to display the TV’s on-screen menu or to turn it off.
CH (Channel Selection)
Press to browse through the TV channels.
Digit (Number Buttons)
Press to directly access a specific TV channel. For a two- or three-digit chan-
nel, enter all numbers. Press a single-digit button and hold for 1 second to
directly access a single-digit channel. These buttons can also be used to enter
values in certain on-screen menu controls.
Backlight
Press this button on the right side of the remote control. The backlighting of
the buttons VOL, CH,
H, and the digit buttons stays on for 5 seconds after
pressing the button.
Picture (AutoPicture™)
Press to select the next item in the AutoPicture™ menu. The factory-set
options are Rich, Natural, Soft, Multimedia, and Eco, each corresponding with
specific factory settings of Contrast, Color, Sharpness, DNR, Dynamic
Contrast, and Color enhancements. You can also select the Personal option,
which is based on the adjustments or settings you make through the Picture
menu. (See page 34 in the Directions for Use.)
Zoom
NOTE: Zooming is disabled in Dual Screen mode.
Press the Zoom button to activate the zoom function. Press the OK button
repeatedly to select one of the zoom magnifications (1x, 4x, 9x, or 16x).
Additionally, you can shift the selected zoom window over the screen with the
Cursor Up, Down, Left, or Right buttons. The zoom window is reset after
selecting another TV channel, another picture format, or when another display
format is selected automatically. Press the Zoom button again to turn off the
zoom function. (See page 28 in the Directions for Use.)
Active Control™ Plus
NOTE: Active Control™ Plus is not available for use with the AV3, AV4,
AV5, and AV6 input sources.
Press to toggle the options Off, Minimum, Medium, and Maximum.
Maximum is the recommended option. (See page 27 in the Directions for
Use.)
Active Control, AutoPicture, AutoSound, AutoSurf, Incredible Surround,
and Natural Motion are trademarks of Philips Consumer Electronics.
Copyright 2003 Philips Consumer Electronics. All rights reserved.
REMOTE CONTROL BUTTONS
SOUND PICTURE
ACITVE
CONTROL
ZOOM