Filter
Top Products
23
SOUND PICTURE
ACITVE
CONTROL
ZOOM
1 2
4
5
2
3
1
POWER
SELECT
GUIDE
INFO
HIGH DEFINITION
POWER
07
08
09
06
07
08
09
06
07
08
09
The Auto Search Method of programming the
remote control can take several minutes to
complete. So before starting, it is recommend-
ed that you sit in a comfortable position at
least six feet from the accessory device. You
will have to hold the remote so that it is
pointed at the front of the device for the entire
time the search is taking place.
1
Turn the accessory device on using the
device’s power button.
2
Press the desired Mode button that cor-
responds to the type of device you
wish to operate—CBL, VCR, AMP,
HD, SAT, DVD, or CD. A green light
will indicate the mode labeled on the
top of the button, while a red light will
indicate the mode labeled on the bot-
tom of the button. If needed, hold the
button down and the light will toggle
between the green and red settings.
3
Press and hold the 1 and 3 Digit
(Number) buttons at the same time until
the Backlight and selected Mode but-
tons light up. Then release both buttons.
4
Press and release the red POWER but-
ton on the remote control. The
Backlight buttons and the selected
Mode button will turn off.
The remote will start the Auto Search of all
available codes, sending a command to chan-
nel up. The backlight will blink after each
code is tried. For devices such as DVD or CD
players, insert a disc and press PLAY on the
device. The remote control will send a com-
mand to switch to the next track. Switch AV
receivers to the tuner function.
IMPORTANT: Watch the channel indicator
of your accessory device closely. Once the
right code is found, the channels on your
device will start to scan up.
5
Press and release the red POWER but-
ton on the remote control as soon as
the channels start to change. The
Backlight buttons and selected Mode
button will blink twice to indicate the
Auto Search code setup is complete.
NOTE: If any other buttons are pressed dur-
ing the procedure, the Auto Search will end.
Remember, Auto Search can take several min-
utes to complete, so please be patient.
PROGRAMMING THE TV REMOTE TO OPERATE ACCESSORY DEVICES