Filter
Top Products
26
SOUND PICTURE
ACITVE
CONTROL
ZOOM
2
1
VCR Mode
Press to place the remote in a mode to con-
trol a VCR.
VCR Prog.
Many VCRs have an automatic program-
ming function. If your VCR has this func-
tion, the universal code set will assign it to
this function.
VCR Timer
Press to set up a timer recording in the VCR
on-screen menu.
• (Record)
Hold the • (Record) and Play
ᮣ
buttons down
to begin a VCR recording.
Stop ■
Press to stop the motion of a tape in play-
back, rewind, and fast forward.
Rewind
ᮤᮤ
Press to rewind tapes. For some VCRs, the
Stop button may have to be pressed first,
then Rewind. In playback mode, hold down
the button to view the picture moving rapid-
ly in reverse.
U
SING THE TV REMOTE
’S VCR-SPECIFIC BUTTONS
To use the TV remote control with a VCR,
first make certain it is set to control your VCR
using one of the programming methods
explained on pages 22 and 23.
1
Press the VCR mode button. Be sure
the button light that appears is green.
2
Point the top of the remote toward the
front of the VCR (remote sensor win-
dow) when pressing the buttons.
Remember, the VCR buttons on the remote will
not operate your VCR if those features are not
found on your VCR remote control.
NOTE: All VCR functions (particularly Search,
Rewind, and Fast Forward) will operate the
same as with the remote control provided with
the VCR.
HELPFUL HINT
Power
Press to turn the VCR on and off.
Cursor Up/Down/Left/Right
Press to navigate the VCR on-screen
customer controls.
CH (Channel Selection)
Press to scan up or down through the
VCR channel numbers.
Digits (Numbers)
Press to directly select VCR channels.
Pause II
Press to temporarily stop the tape dur-
ing playback or recording. Press again
to release Pause.
Play
ᮣ
Press to begin playback of a videotape.
Fast Forward ᮣᮣ
Press to rapidly advance the tape. For
some VCRs, you may need to press the
Stop button first, then the Fast Forward
button. In playback mode, hold the but-
ton down to view the picture moving
rapidly in the forward direction.