Philips 20MC4206 TV DVD Combo User Manual


 
TV
•To confirm that a channel has
been added or deleted, press
CH. /to see if you can or
cannot select the channel.
Only memorized/added
channels can be selected with
CH. /.Use the Number
buttons to select deleted
channels.
If you connected an Antenna
to the TV/DVD, channels 2-69
will be available to add or
delete. If you connected to
Cable TV, channels 1-125 will
be available.
This function will not operate
when the unit is in DVD
mode.
Helpful Hints
20 Adding/Deleting Channels
To put the TV/DVD in TV mode, press SELECT.
You can delete TV channels you no longer receive or seldom
watch. Or, you can add more channels if the TV/DVD did not
memorize all your favorite channels.
1
Press SET-UP.
2
Press or to select CHANNEL SET UP.
Then, press ENTER.
3
Press or to select ADD/DELETE CH. (TV)
or (CATV) will appear beside ADD/DELETE CH. This
indicates whether you connected an Antenna (TV) or
a Cable TV signal (CATV) to the TV/DVD. Then,
press ENTER. The menu will disappear and a TV
channel will appear. The channel number will appear,
along with ADD/DELETE.
4
Press or until the channel you wish to add
or delete appears. You also can use the Number
buttons or CH. /to choose a channel.
5
Press ENTER to add or delete the channel.
To add a channel, press ENTER so ADD and the
channel number appear in light blue (teal). To delete a
channel, press ENTER so DELETE and the channel
number appear in light red (purple).
To delete another channel, repeat steps 4-5.
6
Press SET-UP when you are finished.
ADD / DELETE
08
– CHANNEL SET UP –
ADD / DELETE CH (CATV)
AUTO CH PROGRAMMING
B
– TV SETUP –
CHANNEL SET UP
V-CHIP SET UP
LANGUAGE [ENGLISH]
CAPTION [OFF]
B
0
123
456
7
8
9
+10
+100
CLEAR
PREV NEXT
PLAY
STOP
RETURN
MODE
SELECT
PICTURE
/SLEEP
DISPLAY
CH. VOL.
MUTE
DISC SET-UP
MENU
SLOW PAUSE
TITLE
STANDBY-ON
OPEN/CLOSE
ENTER
1,6
2-5
T9201UB_EN 3/7/06 11:06 AM Page 20