Philips 20MC4304 DVD VCR Combo User Manual


 
AUDIO In Jacks: red and white jacks on the front of the TV/VCR/DVD
which are used to receive or record audio from another source (VCR,
Camcorder, etc.).
Automatic Channel Setup:
process in which the TV/VCR/DVD memorizes
all available TV channels.Then, when you push CH. /,you only scan
through channels you receive.
Auxiliar
y (A
UX):
The channel to which you set your TV/VCR/DVD during
dubbing or when viewing material that is playing on another device that is
connected to the TV/VCR/DVD (for example, a Camcorder or VCR or TV
channels from a Cable Box/Satellite Receiver). Press SELECT to choose AUX
at the TV/VCR/DVD.
Bands:
settings that allow you to tune channels.
Antenna – VHF (very high frequency; channels 2-13) and UHF (ultra high
frequency; channels 14-69).
Cable – standard channels can be received without a Cable Box.
Brightness:
adjusting increases or decreases the brightness of the color on
the screen.
CO
AXIAL Digital Audio Out jack:
Sends digital audio to a stereo,
allowing you to adjust the volume at the stereo.
Color
: adjusting pales or brightens the TV/VCR/DVD picture color.
Dolb
y Digital:A surround sound system that provides 5.1 channel sound as
used in movie theaters. Sound is heard through multiple channels, not just the
right and left as with standard stereo.
Dub
bing: copying a videotape from a separate VCR or camcorder.
HQ:
high quality; a feature in the VCR circuitry which provides enhanced
videotape picture detail through the TV/VCR/DVD.
O
TR:
One-Touch Recording; a timed recording that starts immediately and
records for 30 minutes to 8 hours, whichever you specify.
Sharpness:
adjusting softens or clarifies the picture on the screen.
T
ape Speeds: how fast the videotape travels during playback or recording.
The faster the tape speed, the better the recording quality will be. Faster
speeds (SP) also use more space on the tape. So, you can put more recording
on a tape if you use a slower tape speed (SLP).
SP (standard playback) – fastest tape speed (recording time for a T120 tape
is approximately 2 hours); best picture quality.
LP (long playback) – average tape speed; only playback in this speed is
available on this TV/VCR/DVD.
SLP (super long playback) – slowest tape speed (recording time for a T120
tape is approximately 6 hours).
Tint
: adjusting changes the tints of the picture from purple to green.
VIDEO IN Jack:
yellow jack on the front of the TV/VCR/DVD which is used
to receive or record video from another source (VCR, Camcorder, etc.).
Glossary 79
T2132_1102_0102_EN2_0303 3/3/05 11:16 AM Page 79