Philips VR674CAT VCR User Manual


 
POWER
EJECT
SPEEDVCR/TV
VCR TV
CBL
/DBS
SLOWX2 PLAYF.ADV
TIME INDEX REC END SKIP
MEMORY
1 2 3
4 5 6
7 8 9
0
CH. VOL.
ALT.CH
REW
PLAY
F.FWD
REC
/OTR
PAUSE
/STILL
STOP
MUTE
TRACKING
VCR PLUS+
/ENTER
SEARCH
VAR.SLOW
MENU
STATUS
/EXIT
SMART
PICTURE
CLEAR
12 Automatic Channel Setup
2
Press the MENU button.
SELECT op CHOOSE B
PROGRAM
VCR SET UP
TUNER SET UP
SET CLOCK
AUTO DBS OFF
RECORD LINK
TO END PUSH EXIT
• You can not enter the TUNER SET
UP menu when you are in Line
Input mode (channel 001 or 002).
When you select channel 001 or
002, AV REAR or AV FRONT will
appear on the TV screen briefly.
• You can not program channels if
you are using a Cable Box or DBS.
• If you have an antenna, channels 2-
69 will be available. If you have a
cable connection, channels 1-125
will be available.
Helpful Hints
Although your VCR may automatically memorize the channels you
receive when you turn it on for the first time, this function lets
you set up the channels again.
3
Press the PLAY/o button or the STOP/p button to select
TUNER SET UP, then press the F.FWD/B button.
SELECT op CHOOSE B
AUTO PROGRAMMING
ADD/DELETE CH
CH MEMORY REVIEW
TV STEREO ON
2ND AUDIO
TO END PUSH EXIT
4
Press the PLAY/o button or the STOP/p button to select
AUTO PROGRAMMING, then press the F.FWD/B
button. The VCR distinguishes between TV channels and cable
channels, and the VCR will memorize all the channels you receive.
The channel numbers will appear on the VCR display panel during
channel setup.
5
Wait for a few minutes while the VCR sets up the
channels. When this is complete, CHANNELS ARE SET will
appear on the screen. Then the programming of the lowest chan-
nel number placed in the VCR’s memory will appear on the
screen. Now when you press the CH(annel) o/p buttons, you
will scan only through channels you receive. You may still select
non-memorized channels by pressing the Number buttons.
3-4
1
Press the VCR button.
2
1
AUTO CH PROGRAMMING
IN PROCESS
PLEASE WAIT
START FINISH