Filter
Top Products
VCR/TVPOWER EJECT
1 2 3
4 5 6
7 8 9
0 +100
CHANNEL
SPEED
RENTAL
SELECTOR
AUTO
REPEAT
CLOCK/
COUNTER
EXIT COUNTERDISPLAY
MENU
RESET MEMORY
REWIND / PLAY F.FWD
RECORD PAUSE/STILL
/ STOP
SETTING CLOCK
MONTH DAY YEAR
0 3 / 0 1 – – – –
HOUR MINUTE AM/PM
– – : – – – –
SETTING CLOCK
MONTH DAY YEAR
0 3 / – – – – – –
HOUR MINUTE AM/PM
– – : – – – –
SETTING CLOCK
MONTH DAY YEAR
0 3 / 0 1 1 9 9 8
HOUR MINUTE AM/PM
– – : – – – –
14 Setting the Clock
Follow the steps below to set your VCR’s clock. Make sure:
● The VCR is on and in VCR position. (The VCR/TV light will
appear. If it does not, press the VCR/TV button once.)
3
While the MONTH space is flashing, press the PLAY but-
ton or the STOP button repeatedly until the desired
month appears. Then, press the F.FWD button.
4
While the DAY space is flashing, press the PLAY button
or the STOP button repeatedly until the desired day
appears. Then, press the F.FWD button.
5
While the YEAR space is flashing, press the PLAY button
or the STOP button repeatedly until the desired year
appears. Press the F.FWD button. The day of the week will
appear automatically.
• To reset the clock, follow steps 1 -
2 above. Select the information you
want to change using the F.FWD
button or the REWIND button.
When the desired information is
flashing, use the PLAY button or the
STOP button to enter the correct
information. Press the COUNTER
RESET/EXIT button to exit.
• To display the time, press the DIS-
PLAY button repeatedly until the
time appears on-screen.
• Power failures that last for more
than one minute can cause you to
lose your clock setting.
• Press the REWIND button to go
back one step from the current step
during steps 4 - 8.
Helpful Hints
SETTING CLOCK
MONTH DAY YEAR
– – / – – – – – –
HOUR MINUTE AM/PM
– – : – – – –
1
2-5
2
Press the PLAY button or the STOP button repeatedly to
select SETTING CLOCK. Then, press the F.FWD button.
1
Press the MENU button repeatedly until the INITIALIZE
menu appears.
SVZ122(H1680).QX33 4/6/99 9:42 PM Page 14