Filter
Top Products
VCR/TVPOWER EJECT
1 2 3
4 5 6
7 8 9
0 +100
CHANNEL
SPEED
RENTAL
SELECTOR
AUTO
REPEAT
CLOCK/
COUNTER
EXIT COUNTERDISPLAY
MENU
RESET MEMORY
REWIND / PLAY F.FWD
RECORD PAUSE/STILL
/ STOP
PROGRAM NUMBER 1
→ ONCE
DAILY
WEEKLY
26 Timer Recording
Follow the steps below to program your VCR to record TV pro-
grams while you’re away from home. You can program up to
seven timer recordings. For each one, the VCR will turn itself on,
record, and turn itself off automatically. Before you begin make
sure:
● Channels are set up.
● The clock is set.
● There is a tape in the VCR. Make sure the tape’s record tab is
intact and the tape is long enough to record the program(s).
● The VCR is on and in VCR position. The VCR/TV light will
appear. If it does not, press the VCR/TV button once. (When
you finish programming the timer recording, you must turn off
the VCR.)
1
Press the MENU button until the TIMER PROGRAM-
MING menu appears. Program numbers that do not have a
timer recording stored will flash.
TIMER PROGRAMMING
PROG. 1 2 3 4 5 6 7
DATE
START TIME
END TIME
CHANNEL
REC SPEED
2
Press the PLAY button or the STOP button repeatedly to
select a program number. Then, press the F.FWD button.
(If you select a program number that already has a timer recording
stored, information about that program will appear. Press the
PLAY button or the STOP button to select another program num-
ber.)
3
Press the PLAY button or the STOP button repeatedly to
select a ONCE, DAILY, or WEEKLY recording. When the
arrow is beside your choice, press the F.FWD button.
● ONCE - The VCR will record a TV program on any day you
choose, up to 12 months away.
● DAILY - The VCR will record a TV program at the same time
on the same channel every day, Monday through Sunday.
● WEEKLY - The VCR will record a TV program at the same time
on the same channel every week, for example, every Monday.
PROGRAM NUMBER 1
DATE – – / – –
START TIME – – : – – – –
END TIME – – : – – – –
CHANNEL – –
REC SPEED – –
2-3
1
SVZ122(H1680).QX33 4/6/99 9:42 PM Page 26