Filter
Top Products
Remote Control Buttons (cont’d) 19
STOP Button
Press to stop the tape.
Use to enter digits and information when programming a function
in the on-screen menu (setting the clock, for example). Press to
select an item in the on-screen menu.
PAUSE/STILL Button
During recording, press to temporarily stop the recording. Details
are on page 24. You can not pause a One-Touch Recording. Details
are on page 25. During tape playback, press to freeze the picture.
Press repeatedly to change the position of the noise lines in a Still
picture. Details are on page 34.
F.FWD Button
When tape playback is stopped, press to fast forward the tape at
high speed. During tape playback, press to fast forward the tape
while the picture stays on-screen. Details are on page 34.
Press to add or delete channel numbers. Details are on page 13.
CHANNEL o/p Buttons
Press to scan up or down through the VCR’s channels after the
channels have been set up. Details are on page 12.
COUNTER RESET/EXIT Button
Press to set the real-time counter to zero. Details are on page 36.
Press to remove menus.
VCR/TV Button
Use to select the signal that your TV receives.
● VCR Position
Use to watch a tape, to watch a program while recording it, or to
watch a TV broadcast using the CHANNEL o/p or Number
buttons.
● TV Position
Use to watch TV or to watch one program while recording anoth-
er. Details are on page 31.
COUNTER MEMORY Button
Press to memorize a tape position at which the real-time counter
was set to 0:00:00. Details are on page 36.
EJECT Button
Press to eject the tape.
VCR/TVPOWER EJECT
1 2 3
4 5 6
7 8 9
0 +100
CHANNEL
SPEED
RENTAL
SELECTOR
AUTO
REPEAT
CLOCK/
COUNTER
EXIT COUNTERDISPLAY
MENU
RESET MEMORY
REWIND / PLAY F.FWD
RECORD PAUSE/STILL
/ STOP
CLOCK/COUNTER Button
Press to display the clock or the real-time counter on the TV screen.
AUTO REPEAT Button
Press to play a tape over and over. Press again to cancel the
Repeat Play feature.
SVZ122(H1680).QX33 4/6/99 9:42 PM Page 19