Filter
Top Products
SMART
SMART
B
1
I.S.
3
2
4
6
5
7
9
8
0
e
/
Z
Èé
EXT 1
EXT 1
n
15
To select connected equipment
Press to select the EXT socket.
The switching is automatic on most appliances (decoder, etc.).
The headphones socket is on the right-hand side of the set. When
the headphones are plugged in,the sound on the set is cut off.
Adjust the volume using the
a keys on the remote
control or the
a keys on the television.
The headphones must have an impedance of between 32 and
600 ohms.
Video recorder (only)
Connect as shown using a good quality euroconnector
cable.
If your video recorder does not have a euroconnector socket,the
only connection possible is via the aerial cable. You will therefore
need to tune in your video recorder test signal and assign it to
programme number 0 (see manual store.p. 6).To reproduce the
video recorder picture, press
.
Video recorder with decoder
Connect the decoder to the second euroconnector on the
video recorder.You can then record scrambled
transmissions.
You can connect any other apparatus to the EXT socket
(satellite receiver, decoder,DVD,games,etc.).The socket
has audio and video input/outputs and RGB inputs.
Video recorder
Connecting other appliances
Headphones
Other equipment
L9 1883.1 GB 1/8 15/11/00 13:10 Page 15