Filter
Top Products
3
The remote control keys
Sound mode
To switch from FMSTEREO (and
NICAM STEREO) programmes to
MONO or,for bilingual transmissions,
to choose between DUAL f and
DUAL g(and NICAM-DUAL f,
NICAM-DUAL gand mono).
Timer
To select an automatic standby
period (from 0 to 240 minutes).
Select EXT socket (p.15) or
to access the list of radio
stations (p.9)
Smart sound controls
To access the preset sound modes:
(CINEMA,MUSIC,SPEECH and
return to PERSONAL
Menu
To call up or exit the menus.
Note:the menus disappear
automatically after 20 seconds if no
further command is given.
Cursor
These 4 keys allow you to select
the different menus
Volume
To adjust the sound level.
Mute
To disable or enable the sound.
Radio / TV Mode
To switch between the Radio
and TV mode (p.9).
TV Light
To activate / desactivate the TV
light (p.10).
Alarm on/off
To switch the alarm
function on or off (p.11).
The green
©light on the television
set comes on when the alarm is
activated.
Incredible Surround
Activates/de-activates the surround
sound effect.In stereo,this gives
the impression of the loudspeakers
being further apart.In mono,a
stereo spatial effect is simulated.
Screen Information
To display the screen information
(p.9).
Numerical keys
For direct access to programmes
and teletext pages.
Teletext (p.14)
or confirmation key (p.7)
Standby
To set the TV to standby mode.
To switch the set back on,press
P
, or j.
Smart picture controls
To access a series of settings:
RICH (when the room is very
light),NATURAL (optimum
conditions) SOFT (when the
room is very dark) and return to
PERSONAL.
Select programme
Selects previous or following
programme (p.9).
Teletext keys (p.14)
Alarm off
To turn off the alarm (p.11).
It will be reactivated 24 hours later at
the programmed time.
Alarm menu
To call up or exit the alarm
menu (p.11).
L9 1883.1 GB 1/8 15/11/00 13:10 Page 3