Filter
Top Products
16
Poor reception or no picture
The proximity of mountains or high buildings can cause ghost pictures,echoing or
shadows.If this is the case,try re-positioning the aerial or use an external one.Try using
FINE TUNE (p.6),ensure the right system is selected (p.6)?
Check that the aerial plug or euroconnector is properly connected
.
Check also that the
aerial is capable of receiving broadcasts in this frequency range (UHF or VHF)?
Is the set in TV mode? Press
j.
Adjusting the picture
If the picture is out of focus,or if you are having difficulties finding the right settings,select
one of the Smart picture controls
(p.3) and store it using the PERSONAL setting
(p.12).
In case of bad reception (fuzzy picture),set the
NOISE RED to ON (p.12).
The picture is in black and white
To replay a video cassette,check that it is recorded in the same format as that of the
video recorder (PAL,SECAM or NTSC).Check the colour setting in the menu.
No sound
If certain programmes have a picture but no sound,it is most likely that the correct TV
system has not been selected (p.6).
In radio mode,check that the aerial is properly connected.If reception is poor,use an
external aerial.
Standby
When you switch on the set,if it remains in standby mode and the
LOCKED
message is
displayed,this means that the
LOCK
function is activated
(p.13).
The set switches automatically to standby if it receives no signals for a period of 15 minutes
.
To save electricity,your set is equipped with low energy consumption components which limit
energy consumption when the set is on standby (less than 3 W).
Still having problems?
If the set breaks down,never try to repair it yourself.Consult your after-sales service
department instead.
Tips
ß
Recycling
The materials used in your set are either reusable or can be recycled.
To minimise environmental waste,specialist companies collect appliances and
dismantle them,retrieving any materials that can be used again
(ask your dealer for further details).
L9 1883.1 GB 1/8 15/11/00 13:10 Page 16