Filter
Top Products
9
General use
Your set may receive both TV programmes and FM radio stations.
The
j key on the remote control is used to switch between TV mode
and radio mode.
TV mode
The TV programmes appear on-screen.
Radio mode
The television screen is off.The sound from the radio comes out of the
speakers on the left and right of the set.
Note:
in radio mode,the key gives direct access to a limited number of
settings and the INSTALLATION menu is specific to the radio reception.
TV mode
Use the
P or keys to select the programmes (from 0 to 59).
The number and sound mode are displayed for a few moments on the
screen.To compose a two-figure number using the numerical keys
,
add the 2
nd
figure before the hyphen disappears.
The title of certain programmes appears for a few moments at the bottom of the
screen.To view a programme that has been locked, enter the confidential code
(see p.13).
Radio mode
Use the
P or keys to select the FM radio stations (from 1
to 40).The number, frequency and sound mode are displayed for a few
seconds before the screen goes blank.
List of radio stations
In radio mode, the
key dislays or clears the list of radio stations.You
can then use the
or keys to change the station.
To change the page, select <> (using ) then press or to display the previous
or following pages.
You can also modify how the stations are stored (see p. 7).
TV or radio mode
Press
to display for a few seconds or clear the programme number,
time and sound mode. In radio mode,the frequency of the station is also
displayed.
Permanent display of the programme number
Press
for five seconds to activate the permanent display of the
programme number. Press once to cancel.
a
π°
◊
¬
RESETSET
ALARM
ON/OFF
P
SMART
B
MENU
OK
e
Èé
c
L
I.S.
SMART
a
1
3
2
4
6
5
7
9
8
0
/
B
1
3
2
4
6
5
7
e
/
Z
Z
I.S.
RADIO
~
Choice of TV or radio mode
Selecting the programmes
Screen information
L9 1883.1 GB 1/8 15/11/00 13:10 Page 9