Filter
Top Products
7
TSU9400 Starter’s Guide
3 Adjust the pages of the different activities.
Delete or add buttons to create a personal layout for every customer individually.
Tip The configuration file contains Favorites pages, where you can group the favorite TV
and radio channels of your customer in categories. Position the logo on the placeholder
and assign the correct channel macros via the Channel Macro Wizard.
4 Adjust the codes.
Before you adjust the codes in the configuration file, you add the codes of the specific
A/V component of the customer in My Database.
Read more about the use of My Database in the ProntoEdit Professional Online Help.
To add codes to My Database:
• In Factory Database, search the device, based on its model number and add it to
My Database via the button .
-Or-
• In My Database, learn the codes from the original remote control of the
A/V component.
1 Connect the Control Panel to the PC with the USB cable.
2 Place the original remote 4 to 6 inches (10-15 cm) from the Control Panel in
line with its learning eye.
Check if both the batteries are sufficiently charged.
3 Press and hold the key of the original remote for more than 1 second.
Tip With the Control Panel connected to the PC, you can test newly added codes via
the editor. You press the Test IR button and the code will be sent to the A/V
equipment.
To assign codes to the buttons in the code pages:
1 In the Tools menu, select My Database Quick Access.
2 Select the code from the list and drag-and-drop the code to the button.
4 to 6 inches
(10-15 cm)
TSU9400_INS_ESF.qxd 05-06-2007 14:24 Pagina 10