Filter
Top Products
28 On-Screen Status Displays
5
Press the EXIT/STATUS button to exit.
STOP 12:00 AM
CH 10
SLP M 1:23:45 HIFI
• In On Screen On and Counter Only
modes:
• You may bring up the status dis-
play at any time by pressing the
EXIT/STATUS button. (The excep-
tion is during Slow, Search, or Still
mode.) The display will appear for
about five seconds.
• Channel numbers (when tuned)
will appear for a few seconds.
• When tape playback is stopped,
press the EXIT/STATUS button at
any time to see the time, counter
information, or channel number on
the display panel. During tape play-
back, press the EXIT/STATUS but-
ton to see the time or counter infor-
mation on the display panel. The
channel will not appear.
Function Button
Pressed
Time
Channel
Tape Counter and
Counter Memory
Tape
Speed
Sound Program
Helpful Hints
TO SELECT PUSH NO. SHOWN
1 SET REPEAT PLAY (OFF)
2 ON SCREEN MODE
3 LANGUAGE
4 SET VCR PLUS+ CH
5 SET CABLE BOX
6 SET DSS RECEIVER
7 AUDIO OUT
8 VIDEO STABILIZER (OFF)
TO END PUSH EXIT
TO SELECT PUSH NO. SHOWN
1 ON SCREEN ON (ON)
2 COUNTER ONLY
3 ON SCREEN OFF
TO END PUSH EXIT
An on-screen status display, which includes the current time,
channel, and other information (see illustration of the status dis-
play at right), will appear when you press the EXIT/STATUS but-
ton or certain function buttons. The contents of the status display
may vary.
ON SCREEN ON:
• Whenever you press the PLAY button or the STOP button,
some of the contents of the status display will appear for five
seconds.
COUNTER ONLY:
• The tape counter will appear on-screen at all times. Whenever
you press the PLAY button or the STOP button, some of the
contents of the status display will appear for five seconds. After
five seconds, only the counter will remain on the screen.
ON SCREEN OFF:
• No status display will appear when you press function buttons
or the EXIT/STATUS button.
To select one of the status display modes, follow these
steps.
1
Press the VCR button, then press the MENU button.
2
Press the Number 2 button to select VCR SET UP.
3
Press the Number 2 button to select ON SCREEN MODE.
4
Press the Number 1 button to select ON SCREEN ON,
the Number 2 button to select COUNTER ONLY, or the
Number 3 button to select ON SCREEN OFF. (ON) will
appear beside the selected status display mode.