Filter
Top Products
Using your Wireless TV Link
Wirelessly operating video sources on your
second TV
1 Switch on the video source (VCR, DVD player) connected to your
TV (TV1) and insert a video tape or DVD.
2 Switch on the second TV.
3 Select the SCART input (EXT or AV) on your second TV.
(See User Manual of your TV.)
4 Set the ON/OFF switch on both transmitter (3) and receiver (11) to ON.
> You can now watch the video source on your second TV.
5 Use the video source’s remote control to select the cable programme on
the VCR that you would like to watch on your second TV.
The remote control must be aimed at the receiver.
Note: If you cannot operate a video source remotely, connect the remote control
blaster cord. For this see ‘Using the remote control blaster cord’.
Wirelessly watching cable programmes on your
second TV (TV2) using your VCR
1 Make sure the VCR is connected to the cable TV network and to the
transmitter unit.
2 Switch on the VCR.
3 Switch on the second TV.
4 Select the SCART input (EXT or AV) on your second TV.
(See User Manual of your TV.)
5 Use the VCR’s remote control to select the cable programme on the VCR
to be watched on the second TV.
6 Press Program Up / Down on the remote control to select another cable
programme.
Note:You will not be able to record one program on the VCR and wirelessly
watch other programmes on your second TV at the same time.
ENGLISH 9
TV OUTPUT
R–AUDIO–L VIDEO DC 9V
ON/OFF
TV OUTPUT
R–AUDIO–L VIDEO DC 9V
ON/OFF
AV SOURCE INPUT
R–AUDIO–L VIDEO DC 9V
ON/OFF
AV SOURCE INPUT
R–AUDIO–L VIDEO DC 9V
ON/OFF
XP SBC VL1100 07-02-2003 12:48 Pagina 9